No products in the cart.
How can I get the wood chipper?
A: Our wood chipper is available for pick-up only. However, we can arrange shipping through the logistics company, Manitoulin. Shipping costs will depend on your region.
For more information on shipping and to get a quote, please contact Manitoulin directly. You can visit their website here: Home – MANITOULIN TRANSPORT. Please note that we do not have information on shipping prices as our customers agree on these directly with Manitoulin.
Which models of the wood chipper can be towed on the road and which ones can be transported in a pickup truck box?
A: All our models are road legal. However, there are certain speed limitations to be aware of for safety and legal compliance:
– For our 17hp and 19.5hp models, if you’re driving on the highway, you should limit your speed to 50km/h.
– Our 25hp and 30hp models have a higher speed limit of 100km/h on the highway.
Additionally, our 17hp and 19.5hp models are conveniently sized to fit in the box of a pickup truck, making transportation easy.
What does the warranty of our wood chippers cover?
A: The warranty of our wood chippers covers the engine. However, it does not cover moving parts such as the knives.
Q: Can I buy a set of knives for the wood chipper?
A: Yes, you can purchase a set of knives for our wood chippers directly from our shop. Please note that these are not covered under the original warranty.
How to start the saw for the first time?
A: 1. Warm your saw up to operating temperature before tuning. 2. Let your saw idle for 30 seconds sitting on the ground (somewhat level). Without touching the throttle, pick it up and tilt it forward (bar to the ground). If it stays running, continue to step 3. If it stalls, the “L” low adjustment screw is too rich and will need to be screwed in clockwise. I recommend only adjusting 1/16 of a turn at a time, then check again. 3. From idle, rev the saw. If it accelerates properly and responsive, continue to step 4. If it bogs down and is not responsive, it is too lean. Increase fuel by unscrewing (counterclockwise) the “L” low adjustment screw. Again, I recommend only adjusting 1/16 of a turn at a time, then check again. Continue this step until the saw is responsive and accelerates properly. 4. Adjusting the high screw: rev the saw at full throttle for 5 seconds and no more. If it sounds like it is gargling, it is right were it should be, proceed to step 5. If it is screaming at high pitch, it is too lean. Loosen the “H” high adjustment screw counterclockwise to allow more fuel. Again, I recommend only adjusting 1/16 of a turn at a time, then check again. Repeat this step util the saw gargles at full throttle running free. 5. Let the saw return to idle; if the chain is not moving at all, your saw is properly tuned. If the chain is moving, unscrew counterclockwise the idle adjustment screw until the chain stops moving.
What is the warranty period for the chainsaws?
A: The warranty period for our chainsaws varies depending on the type of usage. For home use, the warranty period is 6 months. However, for commercial use, the warranty is valid for 3 months. Please note that the warranty starts from the date of purchase.
What is Farmertec / Holzfforma and what do they do?
Can you provide an overview of Farmertec / Holzfforma’s history, products, location, and capabilities?
Farmertec / Holzfforma is a distinguished company that has been in operation for over 15 years in China. They have gathered a wealth of supply chain resources and their products are sourced from a network of reliable suppliers, ensuring only top-quality products are offered.
They are a professional manufacturer and exporter of a broad range of products including chainsaws, brush cutters, earth augers, lawn mowers, cultivators, concrete saws, generators, and aftermarket chainsaw and brush cutter parts. Their company is strategically located near the Jinhua-Lishui-Wenzhou Expressway, providing easy access to Ningbo, Shanghai, and Hangzhou cities.
Farmertec / Holzfforma specializes in the production of tools and parts. Their company covers an area of 3000 square meters and employs more than 100 staff members. With fixed assets of 50 million RMB, they have an annual production capacity of 1.5 million sets.
They have been recognized as an “Advanced Enterprise in Zhejiang China” and have several business partners in this industry. They possess abundant technical capability and a strong ability for new product development, backed by the best quality production equipment and advanced technology.
In Canada, they are committed to providing their dealers with the highest quality products and services: Farmertec Canada and The Iron Shop Canada
Q: Why has the shipping price for chainsaws increased?
A: The shipping price for chainsaws has increased due to recent incidents where some of our parcels were lost while using Canada Post. To ensure more reliable delivery, we have switched to other shipping providers, including Purolator.